التعليمات
Why I could not open my leclerc...
Here are few tips of using the leclerc stroller: 1. When you pull up the handbar, you may pull the handbar backwards ...
Can I wash the wood board of...
It is not recommended to wash the wood board of the happa cot. The wood boards are wrapped by covers and it is hard t...
Is that normal for the wood that...
The grain is a normal pattern that would appears in the natural wood and it was certified no harm to the structure of...
Where is Quinny and Maxi Cosi originated...
Quinny and Maxi Cosi are originated from Holland and was a pioneer beyond the field.
If I bought my product in another...
If the product is not sold by us, we will not provide warranty service to parallel import good because we cannot veri...
Is ISOFIX safe than installing with a...
If installed properly, a Maxi-Cosi car seat is the safest in its class. The IsoFix method prevents incorrect installa...
Why is the harness on the car...
There are many automobiles using ALR (Auto Locking Retractor) seat belt design. Once you pull this type of seat belt,...
Do the Maxi-Cosi car seats fit in...
In accordance with the ECE R44/03 and ECE R44/04 norm car seats are universal if not more than a certain length of se...
What should I do if the belts...
Unfortunately there is no easy solution for this. If the belts in your car are too short, we can only recommend that ...
You often hear that a baby should...
There are many misconceptions regarding this.This is generally said and written out of concern for babies and in shor...
Can I put a baby car seat...
Baby car seats Group 0 or 0+ should always be positioned facing backwards and should not be used on a seat with a fro...
How do I avoid breaking the sculpture...
If your plaster mixture seems a little too liquid, or if you have the least doubt, it is preferable to let the cast d...
How much time should I allow to...
Generally, all the stages involved in making a sculpture (excluding the three-hour drying time) take around fifteen t...
How do you pour the plaster into...
Gently and gradually pour the plaster into the mould. To avoid air bubbles remaining at the bottom of the cast, turn ...
How do I select the container needed...
To select the first container for baby’s hand or foot, you should ensure that you will be able to put all of your bab...
How do you avoid cracks appear while...
Leave your product to dry at room temperature – so neither too hot nor too cold. That way you’ll avoid getting cracks...
How long will it take my impression...
Leave your impression made in the Baby Art clay to dry for six hours at room temperature, then turn it over and leave...
What sort of surface should you roll...
We recommend you do your imprint on a sheet of paper (baking paper or aluminium foil) on a flat surface. This means y...
How long do you have to knead...
As indicated in the instructions, knead the clay for at least 30 seconds before rolling it out. The longer you knead,...
Do Baby Art products provides refill pack...
Yes, you can order separately for the spare part clay, alginate and gypsum.
At what age should you make your...
All Baby Art products have been designed for use with children from birth to 3 years old, so it is perfectly safe to ...
Do Baby Art products pose any risk...
Baby Art products are completely safe, even for newborns: they are non-toxic, have been thoroughly tested and conform...
Is the drop side of the 0/3...
Drop side of 0/3 baby CALRA & SABRINA cot can be removed and to be a child bed after adding a bed rail.
How to clean and care for the...
Remove all packing materials before first using. Normal care the mattress by vacuum clean or wiping the mattress surf...
Why there is a dent on mattress...
The top layer of 0/3 baby mattress composed of layers of form and double-sided. The core layer composed of high densi...
How to avoid microbe and germ on...
Microbe and germ loves warm and humid environment, like Hong Kong weather. It is important to keep the baby cot and m...